Pulse power supply with switch 300mA 70386

Pulse power supply with switch 300mA

The pulse stabilized power supply is designed to power preamplifiers/amplifiers in small antenna systems requiring 12 V DC with a maximum consumption of up to 300 mA.
The BEN-12SP power supply is equipped with F connectors for connecting F connectors, which significantly speeds up and facilitates the installation of the coaxial cable.
The BEN-12SP power supply is equipped with a protective circuit against accidental short circuit at the antenna input.
An LED diode indicates the presence of the output voltage and the correct functioning of the power supply.
An integrated power supply coupler allows powering a preamplifier / amplifier placed in the antenna box, via the same coaxial cable, through which the DVB-T signal is transmitted to the television receiver.
The adapter meets the requirements of international ECO-design, CE standards.
These standards guarantee low consumption in "stand-by mode" without load and thus also a reduction in CO2 emissions.
The technology used in the power supply reduces energy consumption in no-load operation by up to 90% compared to a conventional power supply.
Thanks to higher efficiency, compared to standard adapters, it can save up to 30% of electrical energy in regular operation.


Technical data:

ECO design: yes
output current: 300 mA
intended for: powering antenna preamplifiers
length of accompanying cable: not specified
sales packaging: 1 pc, box
power supply coupler: yes
power cable: 1.5 m
input coupler connector: F connector
standby power consumption: <0.3 W
type: SMPS switched
input voltage: 110–230 V
dimensions: 70 × 57 × 23 mm
through-loss of the power supply coupler: 1 dB
output voltage: 12 V
output coupler connector: IEC
filtering capacitor: 470 µF
max. output load continuous/peak: 300 mA
product: power supply