Stabilized power supply with switch 100mA 70130

Stabilized Power Supply with Switch 100mA

Stabilized power supply (adapter) with switch and two F connectors for easy connection of coaxial cable.
The BEN-0712 power supply is equipped with F sockets for connecting F connectors, significantly speeding up and easing the installation of coaxial cable.
The BEN-0712 power supply is equipped with a protective circuit against accidental short circuit at the antenna input.
LED diode indicates the presence of output voltage and correct function of the power supply.
Integrated power switch allows powering of a preamplifier / amplifier located in an antenna box, using the same coaxial cable, through which the DVB-T signal is transmitted to the television receiver.
The adapter meets the requirements of international ECO-design, CE standards.
These standards ensure low consumption in "stand-by-mode" without load, thereby reducing CO2 emissions.
The technology used in the power supply reduces consumption in operation without load by up to 90% compared to a classical power supply.
Thanks to higher efficiency, compared to ordinary adapters, it can save up to 30% of electric energy in regular operation.
Pulsed stabilized power supply is designed for powering preamplifiers / amplifiers in small antenna systems requiring 12 V DC voltage with a maximum consumption of up to 100 mA.

Technical data:
sales packaging: 1 pc, box
ECO design: yes
intended for: powering antenna preamplifiers
output current: 100 mA
length of the leading cable: not stated
power cable: 1.5 m
consumption in standby mode: <0.3 W
input connector of the switch: F connector
power switch: yes
version: SMPS switched
dimensions: 24 imes 68 imes 35 mm
output voltage: 12 V
input voltage: 110–230 V
output connector of the switch: F connector
pass-through attenuation of the power switch: 1 dB
filter capacitor: 470 5F
max. load output steady/in peak: 100 mA
product: power supply