Set of 110pcs threaded eyelets and tapers BJC HQ 05411

Set of 110pcs threaded eyelets and tapers BJC HQ

High-quality 110-piece set of metric tapers and threaded eyelets for manual threading using a tap wrench.
- use on class 10 steel and non-ferrous materials (Al, Cu alloys, etc.)
- metal case

35 pcs threaded eyelets (13 pcs - Outside diameter 38 mm, 22 pcs M25):
2×0.4 3×0.5 4×0.7 5×0.8 6×1.0 6×0.75 7×1.0 7×0.75 8×1.25 8×1.0 8×0.75 9×1.25 9×1.0 9×0.75 10×1.5 10×1.25 10×1.0 10×0.75 11×1.5 11×1.25 11×1.0 11×0.75 12×1.75 12×1.5 12×1.25 12×1.0 12×0.75 14×2.0 14×1.5 14×1.25 14×1.0 16×2.0 16×1.5 16×1.0 18×1.5

70 pcs tapers (35 pcs for pre-drilling and 35 pcs for cutting):
2×0.4 3×0.5 4×0.7 5×0.8 6×1.0 6×0.75 7×1.0 7×0.75 8×1.25 8×1.0 8×0.75 9×1.25 9×1.0 9×0.75 10×1.5 10×1.25 10×1.0 10×0.75 11×1.5 11×1.25 11×1.0 11×0.75 12×1.75 12×1.5 12×1.25 12×1.0 12×0.75 14×2.0 14×1.5 14×1.25 14×1.0 16×2.0 16×1.5 16×1.0 18×1.5

1 pc tap wrench with sliding cross handle (4 leveling jaws to secure the taper)
1 pc tap wrench for tapers: M3-M12 (1/8"-1/2")
1 pc tap wrench for tapers: M6-M20 (1/4"-3/4")
1 pc tap wrench for threaded eyelets: M25 (1")
1 pc tap wrench for threaded eyelets: Outside diameter 38 mm (11/2)")